Nonionic fluorinated-hydrogenated surfactants for the design of mesoporous silica materials

We have investigated the influence of the ratio between the volume of the hydrophilic head ( V A) and the volume of the hydrophobic part ( V B) of the surfactant on the mesopore ordering. To understand the difference of behavior we have performed a complete study dealing with fluorinated [R m (F)(EO) n ] and hydrogenated [R m (H)(EO) n ] surfactants. Their mixtures have also been taken into account. Here only the phase diagrams and the structural parameters of the liquid crystal phases of the mixed systems are reported. We have shown that the mutual or partial miscibility of the fluorinated and the hydrogenated surfactants depends on the number of oxyethylene units of each surfactant. To follow, various systems were used for the preparation of silica mesoporous materials via a cooperative templating mechanism (CTM). Results clearly reveal that V A/ V B ratios in the range between 0.95 and 1.78 lead to the formation of well-ordered mesostructures. Wormhole-like structures are obtained for higher or lower values. Moreover, results show that from the V A/ V B point of view, polyoxyethylene fluoroalkyl ether surfactants behave like their hydrogenated analogues.     

The electronic structure and adsorption geometry of L-histidine on Cu(110)

The adsorption of L-histidine on clean and oxygen-covered Cu(110) surfaces has been studied by soft X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The valence band spectra, carbon, nitrogen and oxygen 1 s XPS and N K edge absorption spectra were measured for submonolayer, monolayer, and multilayer films. The spectra provide a detailed picture of the electronic structure and adsorption geometry at each coverage. In the monolayer, the histidine molecules are randomly oriented, in contrast to the submonolayer regime, where the molecules are coordinated to the copper surface with the imidazole functional group nearly parallel to, and strongly interacting with, the surface. The pi*/sigma* intensity ratio in NEXAFS spectra at the nitrogen edge varies strongly with angle, showing the imidazole ring is oriented. Adsorption models are proposed.     

Mn助剂加入方式对铁基催化剂F-T合成性能的影响

采用连续共沉淀与喷雾干燥成型技术相结合的方法制备了系列微球状Fe/Mn/K催化剂,结合H2 DTG、CO TPR、Mossbauer谱等表征手段,研究了Mn助剂的加入方式对铁基催化剂物相结构、还原和碳化行为以及F-T合成性能的影响。催化剂在浆态床反应器中以接近F-T合成实际工况条件 (250℃、1.5MPa、H2/CO=0.67和2.0L /(gcat·h)) 进行评价。结果表明,以共沉淀方式加入Mn助剂具有较强的Fe Mn相互作用,从而抑制了催化剂的还原和碳化,降低了催化剂的活性,提高了催化剂的稳定性。而以部分共沉淀和黏结剂方式加入Mn助剂促进了催化剂的还原和碳化,提高了反应活性加速了催化剂的失活。与共沉淀Mn相比,部分共沉淀和黏结剂Mn提高了重质烃和烯烃的选择性,同时抑制了有机含氧化合物的生成。     

Theoretical Study on the Electronic Structures of Small TinNm （n ＋ m = 5, 6） Clusters

45 isomers of TinNm （n ＋ m = 5, 6） clusters, including linear, some planar and some stero configurations, have been predicted by density functional theory method. For five-atom clusters Ti3N2 and Ti2N3, the most stable structures are trigonal bipyramid in D3h symmetry, and for TiaN cluster, the isomer with one nitrogen atom occupying the center of quasi-tetrahedron is the most stable. In the isomers of Ti4N2 and Ti3N3, the planar networks are more stable, but for Ti2N4, the six-membered ring configuration is the most favorable. Most linear structures can form weak-strong bonds alternately with higher energy. As regards to planar structures, the more Ti-N bonds are formed, the more stable they will be; for stero closed polyhedral isomers, their energies are lower.     

Synthesis, Crystal Structure and Magnetic Properties of a New Zn(II)-Nitronyl Nitroxide Complex

A new complex [Zn(NIT-1'-MeBzIm)Cl2(H2O)] (NIT-1'-MeBzIm = 2-{2'-[(l'- methyl)benzimidazolyl]}-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide) has been prepared and structurally characterized by X-ray diffraction method. Crystal data: monoclinic, space group P21/n, Z = 4, C15H21Cl2N4O3Zn, Mr = 441.63, a = 7.2225(10), b = 30.849(4), c = 8.8758(13) , β = 103.904(2)°, V = 1919.6(5) 3, Dc = 1.528 g/cm3, μ(MoKα) = 1.579 mm1, F(000) = 908, R = 0.0436 and wR = 0.1029 for 2456 observed reflections with I > 2σ(I). X-ray analysis reveals that the Zn(II) ion is four-coordinated with a distorted tetrahedron. There also exist H-bonds, π-π piling interactions and weak intermolecular contacts between the NO groups which form a mutual stagger 3-D network configuration. Magnetic investigation reveals that there exists intermolecular antiferro- and ferromagnetic interactions in the title complex.     

Synthesis and Crystal Structure of (E)-4-(Benzyloxy)-2-(cinnamoyloxy)-N,N,N-trimethyl-4-oxobutan-1-aminium Chloride as a Double-prodrug

A novel hydrochloride quaternary ammonium salt (E)-4-(benzyloxy)-2-(cinnamo- yloxy)-N,N,N-trimethyl-4-oxobutan-1-aminium chloride (C23H29NO4Cl2, Mr = 454.37) has been synthesized via the sequence of acetylation and esterification by using L-carnitine (L-4-N-trimethy- lammonium-3-hydroxybutyric acid, LC) and cinnamic acid as the starting materials, and its crystal structure was determined by single-crystal X-ray diffraction method. The crystal belongs to monoclinic, space group P212121 with a = 10.1670(4), b = 10.4488(4), c = 22.9795(11) ?, V = 2441.18(18) ?3, Z = 4, Dc = 1.236 g/cm3, μ(MoKα) = 0.293 mm?1, F(000) = 960, Flack factor = –0.01(11), the final R = 0.0489 and wR = 0.1550 for 3350 observed reflections (I > 2σ(I)) and R = 0.0953 for all 5648 unique reflections. The crystal structure involves a conjugated system which shows a reverse olefin structure.     

ELECTROCHEMICAL COPOLYMERIZATION OF DIBENZOFURAN AND 3-METHYLTHIOPHENE IN BORON TRIFLUORIDE DIETHYL ETHERATE

The copolymerization of dibenzofuran(DBF)and 3-methylthiophene(MET)was successfully achieved electrochemically by direct anodic oxidation of the monomer mixtures in boron trifluoride diethyl etherate.The effects of applied polymerization potential and the monomer concentration ratios on the copolymerization were investigated by linear sweep voltammetry and cyclic voltammetry(CV).The structure of copolymer films were investigated by UV-Vis,infrared spectroscopy,thermal analysis.As-formed novel copolymers ...     

基于四丹磺酰胺杯[4]芳烃的汞离子荧光化学传感器

我们方便地合成了上沿修饰四丹磺酰胺基团的杯[4]芳烃衍生物1,发现该化合物在含50％水的乙腈中显示出对汞离子高选择性和灵敏性的识别作用,竞争实验表明多数金属离子对其检测干扰较小。机理研究结果表明荧光萃灭源于由丹磺酰胺基团到汞离子的光致电子转移过程。另外,通过研究1和1-Hg2+的荧光衰减实验,以及对比双丹磺酰胺杯[4]芳烃2和单丹磺酰胺杯[4]芳烃3对汞离子的识别作用,发现化合物1的四丹磺酰胺基团具有很好的预组织和协同作用。化合物1对汞离子的检测限为3.41×10-6 mol·L-1,这可以使1成为一个潜在的汞离子荧光化学传感器。     

邻-(N-芳酰基-N-甲氨基苯)-二硫化合物的合成：通过N-甲基-2-单芳基苯并噻唑啉在溶剂中的自发偶联反应和它们的血管内皮生长因子抑制活性

N-甲基-2-单芳基苯并噻唑啉 (1) 在固体状态时可以稳定地储藏在空气中。但是,它们在不同溶剂中却表现出了不同的行为。在醇溶液或二甲亚砜-水的体系中,1相对稳定;而在其它有机溶剂如：丙酮,氯仿,二氯甲烷和乙酸乙酯等溶剂中,会发生自发偶联反应生成相应的邻-(N-芳酰基-N-甲氨基苯)-二硫化合物 (2)。对这些新的化合物 (1) 和 (2) 进行了体外人乳腺癌细胞 (MDA-MB-231) 血管内皮生长因子靶点筛选,大部分化合物都表现出了抑制活性。实验结果表明这两类化合物 (1) 和 (2) 作为血管内皮生长因子抑制剂值得进行深入研究。     

二元无机物标准熵 So298的拓扑研究

为了预测二元无机物的标准熵,基于分子图的连接矩阵和离子参数gi、qi,提出了一种新的连接性指数mQ, mG及其逆指数mQ’, mG’。 qi、gi定义为：qi=(1.1+Zi1.1) /(1.7+ni), gi=(1.4+Zi) /(0.9+ri+ri-1),其中Zi 、ni和 ri分别代表离子i的电荷数、最外层主量子数和半径。从0Q, 0Q’, 1G,和1G’,利用多元线性回归分析方法和人工神经网络方法,可以构建优良的QSPR模型。对371个二元无机物,其多元线性模型及神经网络模型的相关系数、标准偏差和平均绝对偏差分别是：0.9905, 8.29 J.K-1.mol-1, 6.48 J. K-1.mol-1, 0.9960, 5.37 J.K-1.mol-1 和 3.90 J.K-1.mol-1。留一法交叉验证表明,其多元线性模型具有良好的稳定性。两个模型对187个未进入模型的二元无机物的标准熵的预测值和实验值之间的相关系数、标准偏差和平均绝对偏差分别是：0.9897, 8.64 J. K-1.mol-1, 6.84 J. K-1.mol-1, 0.9957, 5.63 J.K-1.mol-1, 和 4.18 J.K-1.mol-1。研究表明,本文方法在预测二元无机物标准熵时比文献方法更有效,两种模型均能较精确的预测二元无机物的标准熵,且神经网络模型的预测结果更精确。